Click or drag to resize

Acquisition Properties

The SettingsAcquisition type exposes the following members.

Properties
  NameDescription
Public propertyAperture
Aperture setting for the camera. Specified as an f-number (the ratio of lens focal length to the effective aperture diameter).
Public propertyBrightness
Brightness controls the light output from the projector. Brightness above 1.0 may be needed when the distance between the camera and the scene is large, or in case of high levels of ambient lighting. When brightness is above 1.0 the duty cycle of the camera (the percentage of time the camera can capture) will be reduced. The duty cycle in boost mode is 50%. The duty cycle is calculated over a 10 second period. This limitation is enforced automatically by the camera. Calling capture when the duty cycle limit has been reached will cause the camera to first wait (sleep) for a duration of time to cool down, before capture will start.
Public propertyExposureTime
Exposure time for each single image in the measurement. Affects frame rate.
Public propertyGain
Analog gain in the camera
Top
See Also