SettingsBrightness Property |
Brightness controls the light output from the projector.
Brightness above 1.0 may be needed when the distance between the camera and the
scene is large, or in case of high levels of ambient lighting. Brightness above 1.0
is only supported on Zivid One Plus.
When brightness is above 1.0 some limitations apply:
1) Live mode is not supported.
2) The duty cycle of the camera (the percentage of time the camera can capture frames) will be reduced.
The lights in the projector can be lit for at most 50% of the time during a 10 second period. This limitation
is enforced automatically by the camera. Calling capture when the duty cycle limit has been reached will cause
the camera to first wait (sleep) for a duration of time to cool down, before capture will start.
Namespace:
Zivid.NET
Assembly:
ZividCoreNET (in ZividCoreNET.dll) Version: 0.0.0.0
Syntaxpublic double Brightness { get; set; }
Public Property Brightness As Double
Get
Set
public:
property double Brightness {
double get ();
void set (double value);
}
Property Value
Type:
Double
See Also