Settings Properties |
The Settings type exposes the following members.
Name | Description | |
---|---|---|
![]() | Bidirectional | Enable or disable the use of bi-directional patterns (requires twice as many patterns as well as increased exposure time) |
![]() | BlueBalance | White balance of blue channel in the camera |
![]() | BlueBalanceRange | The range of valid values |
![]() | Brightness | Brightness controls the light output from the projector.
Brightness above 1.0 may be needed when the distance between the camera and the
scene is large, or in case of high levels of ambient lighting. Brightness above 1.0
is only supported on Zivid One Plus.
When brightness is above 1.0 some limitations apply:
1) Live mode is not supported.
2) The duty cycle of the camera (the percentage of time the camera can capture frames) will be reduced.
The lights in the projector can be lit for at most 50% of the time during a 10 second period. This limitation
is enforced automatically by the camera. Calling capture when the duty cycle limit has been reached will cause
the camera to first wait (sleep) for a duration of time to cool down, before capture will start.
|
![]() | BrightnessRange | The range of valid values |
![]() | ExposureTime | Exposure time for each single image in the measurement. Affects frame rate. |
![]() | ExposureTimeRange | The range of valid values |
![]() | Filters | Collection of filters |
![]() | Gain | Analog gain in the camera |
![]() | GainRange | The range of valid values |
![]() | Iris | Iris (aperture) setting for the camera |
![]() | IrisRange | The range of valid values |
![]() | RedBalance | White balance of red channel in the camera |
![]() | RedBalanceRange | The range of valid values |